You Don't Have to Be a Software Expert to Model Multiphase Flow

• Oil sprays that cool and lubricate gearboxes
• Sparging mixing tanks that bubble gas through liquids
• Solid catalyst suspensions mixing in a fluidic reactor

Traditionally, engineers can find it demanding to model these applications using the correct phase transitions, physical properties and chemical/thermal interactions.

That is why the latest release of Ansys Fluent enhances the multiphase modeling experience. Even if users have minimal training with the software, these enhancements enable them to quickly set up simulations with complex phase regime transitions. To learn more, watch the multiphase update webinar.
 

Streamlined GUI Simplifies the Setup of Multiphase Models

The Fluent multiphase panel offers a tab-based workflow that organizes all the steps to set up the model. Experts and novices alike are guided through multiple tabs, similar to an internet browser, which walk them through the pre-processing of the simulation.

An engineer sets up a multiphase flow in Ansys Fluent’s tab-based workflow.

Benchmark tests of the tabbed panel suggest that it reduced pre-processing time by 25% and eliminated the need to interact with 17 different sections of the software.

A new interactive graphical user interface (GUI) also simplifies how engineers produce flow simulations within Fluent. The key feature is that engineers work directly on models and graphical elements.

For instance, they can access a pop-up menu by clicking on the model. From that menu, they can change the boundary settings — like declaring an inlet and flowrate. Once the boundary settings are created, arrows appear to graphically represent the inlets, outlets and flow direction through the geometry.
 

A New Model Simulates Gas‒Liquid Flow Regime Transitions

The latest release of Fluent includes a method to simulate gas‒liquid flow regime transitions using the algebraic interfacial area density (AIAD) model. The aforementioned GUI workflow makes it easy for an engineer to set up simulations using this new model.

An AIAD simulation, in Ansys Fluent, shows gas‒liquid flow with droplet entrainment and re-absorption.

AIAD can simulate the drag and interface between phases based on flow morphology. The model also accounts for the sub-grid scale turbulence that is associated with interfacial instabilities at the free surface. This enables it to predict, for example, counter-current flow and flooding which affects heat transfer.

For greater accuracy, engineers can add a third phase to the model that includes mass transfer mechanisms. These mechanisms represent:

• The breakage of a continuous phase into dispersed phases via entrainment
• The mixture of dispersed phases into a continuous fluid phase via absorption

AIAD can also be combined with a population balance model to keep track of the size distribution of bubbles or droplets within the flow.

To learn more, watch the webinar: Multiscale Modeling of Multiphase Flows.

Any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans such as Ansys and Ansys Fluent are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries.