Skip to Main Content

Ansys HFSS 3D Layout
기본교육

소개

본 강좌는 ECAD 데이터를 이용한Stackup 구조의 해석 시뮬레이션 소프트웨어인 HFSS 3D Layout에 대한 교육과정입니다.  HFSS 3D layout은 PCB와 IC 형태의 Stackup 구조의 해석에 대해 HFSS를 처음 접하거나 초보자인 분들을 대상으로 한 교육으로써, 기본 사용법 및 간단한 예제들을 따라 해보면서 익히는 기초 교육입니다.

대상

PCB와 IC 형태의 Stackup 구조의 해석에 관심이 있는 연관분야의 대학(원)생 및 엔지니어 

Learning Outcome

Following the completion of this course, you will be able to:

  • Place ports, vias, and connect solder balls to ground planes. 
  • Configure circuits driving EM simulations hierarchically 
  • Bring in external HFSS designs and position them in 3D Layout
  • Create output variables for calculated quantities like qualityfactor
  • Set up FEM (finite element method) analyses in HFSS 3D Layout
  • Generate and view results plots (post processing) of S-parameters

 Available Dates

Learning Options

Training materials for this course are available with a Ansys Learning Hub Subscription. If there is no active public schedule available, private training can be arranged. Please contact us.

Agenda 

This is a 1 day classroom course covering both tutorials and workshops.

    • Module 1 - Introduction

  • Lecture: Introduction to HFSS 3D Layout in AEDT
  • Workshop 1.1: Connector on Board with FEM solver
  • Workshop 1.2: SSN with SIwave solver
  • Workshop 1.3: Planar Antenna Array with MoM solver
     
    • Module 2 - Viewing and Visibility

  • Lecture: HFSS 3D Layout Viewing and Visibility
  • Workshop 2.1: Differential Via Trace Layer
     
    • Module 3 - Solution Setup

  • Lecture: HFSS 3D Layout Solution Setup
  • Workshop 3.1: Octagonal Spiral Inductor
     
    • Module 4 - Ports 

  • Lecture: HFSS 3D Layout Ports
  • Workshop 4.1: Ball Grid Array Subdesign Cutout
     
    • Module 5 - Extents

  • Lecture: Simulation Boundary Extents
  • Workshop 5.1: 62mil FR-4 Microstrip Extents
     
    • Module 6 - Hierarchy and Circuits

  • Lecture: Simulation Hierarchy Circuit Simulation
  • Workshop 6.1: Differential Via Eye Diagram Circuit
  • Workshop 6.2: Differential Via TDR Circuit
     
    • Module 7 - Layout Driven Assembly

  • Workshop 7.1: 5G Cell Phone