ANSYS 13.0 CAD Interfaces
| Windows 64 on x64 | Windows 32 on x86 | Linux 64 on x64 | Linux 32 on x86 | ||||||||
| CAD Package | Version of CAD Package |
Microsoft Windows 7 x64 | Microsoft Windows Vista x64 | Microsoft Windows XP Pro x64 | Microsoft Windows 7 32-bit | Microsoft Windows Vista 32-bit | Microsoft Windows XP Pro 32-bit | SUSE Linux Enterprise (SLES) Version 11 | SUSE Linux Enterprise (SLES) Version 10 | Red Hat Enterprise Linux (RHEL) Version 5 | Red Hat Enterprise Linux (RHEL) Version 5 |
| ACIS (SAT) | ACIS 20 |  |
|
|
|
|
|
|
|
|
|
| CADNexus/CAPRI CAE Gateway | CATIA V5 - R19 | 1 |
|
|
1 |
|
|
||||
| CATIA V5 - R18 SP4 | |
|
|
||||||||
| CATIA V5 - R18 | |
|
|||||||||
| CATIA | CATIA V5 - R20 | |
|
|
|
|
|
||||
| CATIA V4 | |
|
|
|
|
|
|||||
| GAMBIT | 2.4.6 | |
|
|
|
|
|
|
|
|
|
| IGES | 4.0, 5.2, 5.3 | |
|
|
|
|
|
|
|
|
|
| JTOpen | 8.0 & 8.1 | |
|
|
|
|
|
||||
| Parasolid | Parasolid 22 | |
|
|
|
|
|
|
|
|
|
| STEP | AP203, AP214 | |
|
|
|
|
|
|
|
|
|
| Autodesk Inventor | Inventor 2011 | |
|
|
|
|
|
||||
| Inventor 2010 | |
|
|
|
|
|
|||||
| CoCreate Modeling | 17.0 | |
|
|
|
|
|
||||
| 2008 | |
|
|
|
|||||||
| NX | NX 7.5 | |
|
|
|
|
|
2 |
3 |
||
| NX 7.0 | |
|
|
|
|||||||
| NX 6.0 | |
|
|
|
|
|
|
1 |
|||
| Pro/Engineer | Pro/Engineer Wildfire 5 | 4 |
|
|
4 |
|
|
||||
| Pro/Engineer Wildfire 4 | 5 |
|
|
5 |
|
|
|||||
| Pro/Engineer Wildfire 3 | |
1 |
|||||||||
| Pro/Engineer for Spatial CAD Reader | Pro/Engineer Wildfire 5 | |
|
|
|
|
|
||||
| Solid Edge | Solid Edge Version 103 ST3 | 6 |
6 |
6 |
6 |
6 |
6 |
||||
| Solid Edge Version 102 MP4 | |
|
|
|
|
|
|||||
| Solid Edge Version 100 MP9 | |
|
|
|
|||||||
| SolidWorks | SolidWorks 2012 | |
7 |
8 |
|
7 |
9 |
||||
| SolidWorks 2011 | |
7 |
8 |
|
7 |
9 |
|||||
| SolidWorks 2010 | 10 |
|
|
10 |
|
|
|||||
| SolidWorks 2009 | |
|
|
|
|||||||
| Teamcenter Engineering | 8.0 with NX 6.0 | 11 |
11 |
11 |
|||||||
| 2007 with NX 6.0 | 11 |
11 |
11 |
||||||||
| 2005 SR1 with NX 6.0 | 11 |
11 |
|||||||||
1 - ANSYS tested but CAD vender does not claim support on this system
2 - SUSE Linux Enterprise (SLES) Version 10 SP2 is supported
3 - Red Hat 5.3 is supported
4 - Requires Pro/E Wildfire 5 M020
5 - Requires Pro/E Wildfire 4 M120
6 - The synchronous line features from Solid Edge will be named as 'Face Set_N', where N is the line feature number, instead of the object name (e.g. 'Keypoint Curve 1') as in previous releases. This will be returned to the prior behavior in future releases.
7 - Requires Microsoft Windows Vista SP1 or higher
8 - Requires Microsoft Windows XP Professional SP2
9 - Requires Microsoft Windows XP Professional SP3
10 - Requires SW 2010 SP1
11 - PlugIn-only Support
NOTE: Release 13.0 may be the final release to support some platforms. See details.